How to Connect Oculus Go to PC?

Posted On 18/02/2023

The Oculus Go is a cutting-edge virtual reality headset that provides its users with an immersive and interactive experience. With the latest advancements in technology, the Oculus Go can now be easily connected to a PC for easier access to content. This article will provide readers with a step-by-step guide on how to connect the Oculus Go to their PC. Additionally, this article will explain the benefits of connecting the Oculus Go to your PC and how it can enhance your gaming and entertainment experiences.

Can You Use Oculus Go With PC?

The answer is yes! You can connect an Oculus Go to your PC using the HDMI and USB cables included in the box. In fact, connecting your Oculus Go to a computer opens up a world of possibilities – from playing high-end VR games to streaming video content on the big screen. Plus, you can even create and test out 3D models or explore virtual museums with just a few clicks of your mouse. Connecting an Oculus Go to your PC is easy and will allow you to experience a whole new level of immersion when it comes to gaming or entertainment. To ensure that everything runs smoothly, however, be sure that your computer meets the minimum requirements for Oculus Go, such as having at least 8GB of RAM and a compatible graphics card.

How to Connect Oculus Go to PC?

The Oculus Go is a revolutionary virtual reality headset, allowing users to experience a variety of virtual worlds. It has become increasingly popular for gaming, video streaming, and immersive entertainment. Recently, the ability to connect an Oculus Go to a PC has been made available, further increasing its potential and user accessibility. We will discuss the steps of connecting an Oculus Go to a PC and what users can expect from the process.

Step 1: Set Up Oculus Go

Before you can connect your Oculus Go to your PC, you need to set it up first. Follow these steps to get started:

1. Turn on your Oculus Go and follow the on-screen instructions to set it up.
2. Once your Oculus Go is set up, put it on and adjust the straps until it fits comfortably on your head.
3. Navigate to the Settings menu on your Oculus Go, select “Device,” and then select “More Settings.”
4. Scroll down and select “Developer Mode.”
5. Turn on “Developer Mode” and take note of the IP address displayed on the screen. You will need this later when you connect your Oculus Go to your PC.

Step 2: Connect Oculus Go to Wi-Fi

To connect your Oculus Go to your PC, both devices need to be on the same Wi-Fi network. Follow these steps to connect your Oculus Go to Wi-Fi:

1. Navigate to the Settings menu on your Oculus Go, select “Wi-Fi,” and then select your Wi-Fi network.
2. Enter your Wi-Fi network password and select “Connect.”
3. Once your Oculus Go is connected to Wi-Fi, take note of the IP address displayed on the screen. You will need this later when you connect your Oculus Go to your PC.

Step 3: Set up Developer Mode

To connect your Oculus Go to your PC, you need to enable Developer Mode. Follow these steps to set up Developer Mode:

1. Download and install the Oculus app on your PC from the official Oculus website.
2. Open the Oculus app on your PC and sign in with your Oculus account.
3. Click on the gear icon in the top-right corner of the Oculus app and select “Settings.”
4. Select the “General” tab and toggle on “Unknown Sources” to enable sideloading.
5. Turn on your Oculus Go and navigate to the Settings menu.
6. Select “Device,” then select “More Settings.”
7. Scroll down and select “Developer Mode.”
8. Turn on “Developer Mode” and enter the IP address displayed on your Oculus Go.
9. Click “Pair” on the Oculus app on your PC to connect your Oculus Go to your PC.

Step 4: Install Software & Drivers

To connect your Oculus Go to your PC, you need to install some software and drivers. Follow these steps to install the necessary software and drivers:

1. Download and install the Android Debug Bridge (ADB) on your PC.
2. Connect your Oculus Go to your PC using a USB cable.
3. Open a command prompt window on your PC and navigate to the directory where you installed the ADB.
4. Type the following command: adb devices
5. Your Oculus Go should appear in the list of connected devices.
6. Download and install the Oculus ADB Drivers on your PC.
7. Follow the on-screen instructions to complete the installation.

Step 5: Connect Devices

Once you have set up Developer Mode and installed the necessary software and drivers, you can connect your Oculus Go to your PC. Follow these steps to connect your devices:

1. Turn on your Oculus Go and put it on.
2. Connect your Oculus Go to your PC using a USB cable.
3. On your PC, open the Oculus app and select the “Devices” tab.
4. Your Oculus Go should appear under “Device Setup.” Select it.
5. Follow the on-screen instructions to complete the device setup process.
6. Once the device setup process is complete, you can now use your Oculus Go with your PC.

Troubleshooting Tips

If you encounter any issues while connecting your Oculus Go to your PC, here are some troubleshooting tips:

1. Make sure your Oculus Go and PC are connected to the same Wi-Fi network.
2. Check that you have enabled Developer Mode on your Oculus Go and installed the necessary software and drivers on your PC.
3. If your Oculus Go is not appearing in the list of connected devices when you run the “adb devices” command, make sure your USB cable is properly connected and try a different USB port.
4. If you are still unable to connect your Oculus Go to your PC, try restarting both devices and repeating the steps above.

Oculus Go HDMI Input

Oculus Go is a standalone VR headset that does not have an HDMI input. It can only be used with the devices that it is compatible with, such as a PC or smartphone. If you want to connect your Oculus Go to a TV or monitor, you can do so using a Chromecast or a similar device. Simply connect the Chromecast to your TV or monitor, and then use the Oculus app on your smartphone to cast your VR experience to the Chromecast. This allows you to share your VR experience with others and enjoy it on a larger screen. However, it is important to note that not all VR experiences are compatible with casting, so be sure to check before attempting to cast your experience.

Oculus Go Not Connecting to PC

If your Oculus Go is not connecting to your PC, there are several possible causes. First, make sure that you have enabled Developer Mode on your Oculus Go and installed the necessary software and drivers on your PC. Also, ensure that both devices are connected to the same Wi-Fi network. If your Oculus Go is still not connecting, try restarting both devices and repeating the connection process. Another possible solution is to try using a different USB cable or USB port. If the problem persists, you can contact Oculus support for further assistance.

Virtual Desktop Oculus Go Free

Virtual Desktop is a popular app that allows you to use your Oculus Go as a virtual desktop. With Virtual Desktop, you can access your PC desktop and use it in VR. While there is a paid version of Virtual Desktop, there is also a free version available that allows you to use the basic features of the app. With the free version, you can use your Oculus Go to browse the web, watch videos, and access your PC files. However, the free version does not support some of the more advanced features, such as multi-monitor support and custom environments. To get the full experience, you will need to purchase the paid version of Virtual Desktop.

How to Connect Oculus Go to Steam VR?

Connecting your Oculus Go to Steam VR allows you to access a wide range of VR games and experiences. To connect your Oculus Go to Steam VR, you will need to use a third-party app such as ALVR or Riftcat. These apps allow you to stream your PC’s VR content to your Oculus Go, allowing you to play Steam VR games and use other VR apps. To get started, install the third-party app on your PC and your Oculus Go, and then follow the on-screen instructions to set up the connection. Be sure to check that your PC meets the minimum system requirements for Steam VR, as some VR games and experiences may require a more powerful PC. With your Oculus Go connected to Steam VR, you can enjoy a whole new world of VR content.

Conclusion

Connecting Oculus Go to your PC is a great way to expand the capabilities of your device. With the right adapter, you can now enjoy all the features of a desktop headset and play some of your favorite games on the big screen. Additionally, you can stream videos from the internet or watch movies in 3D. With this connection, you can also access VR experiences that are not available on mobile devices. This connection allows for endless possibilities and makes it easy to use your Oculus Go wherever you go.